Revive Your Bathroom Tiles with These Cleaning Tips

Are your bathroom tiles looking dull and grimy? 

It happens to the best of us. 

But with the right cleaning techniques, you can bring back the shine and freshness to your bathroom tiles. 

This blog will guide you through some simple yet effective methods on how to clean bathroom tiles and make them sparkle like new again.

Getting Started

Before you begin the cleaning process, it's essential to gather all the necessary supplies. You'll need:

  • A bucket
  • Warm water
  • White vinegar or a commercial tile cleaner
  • Baking soda
  • A scrub brush or sponge
  • Microfiber cloth or towels
  • Rubber gloves (optional)

Having all your supplies ready ensures a smooth and efficient cleaning process.

Step 1: Preparing the Solution

cleaning the bathroom

Once you have your supplies ready, it's time to prepare the cleaning solution. 

Fill a bucket with warm water and add either white vinegar or a commercial tile cleaner. 

White vinegar is a natural and effective cleaner that helps remove dirt and grime from tiles. 

If you prefer using a commercial cleaner, make sure it's suitable for the type of tiles you have in your bathroom.

Step 2: Scrubbing the Tiles

With the cleaning solution prepared, dip a scrub brush or sponge into the solution and start scrubbing the tiles. 

Focus on areas that accumulate the most dirt and grime, such as around the bathtub, shower area, and sink. 

Using circular motions helps loosen dirt effectively and ensures a thorough clean.

Step 3: Tackling Stubborn Stains

For stubborn stains or mildew build-up, sprinkle some baking soda directly onto the affected areas. 

Baking soda acts as a natural abrasive, helping to lift stains and brighten the tiles. 

Use your scrub brush or sponge to scrub the stained areas gently. 

The combination of baking soda and the cleaning solution works wonders in removing tough stains.

Step 4: Rinsing the Tiles

Once you've scrubbed all the tiles, it's time to rinse them thoroughly. 

Fill another bucket with clean, warm water and use a clean sponge or cloth to wipe away the cleaning solution from the tiles. 

Rinse the tiles multiple times to ensure all residue is removed. 

Proper rinsing is crucial to prevent any leftover cleaning solution from leaving streaks or residue on the tiles.

Step 5: Drying the Tiles

After rinsing, it's essential to dry the tiles thoroughly to prevent water spots and maintain their shine. 

Use a microfiber cloth or towels to dry the tiles and grout lines completely. 

Pay attention to areas where water tends to accumulate, such as corners and edges. 

Drying the tiles effectively ensures they look clean and sparkling.

Maintaining Cleanliness

Now that your bathroom tiles are clean and shiny, it's essential to maintain their cleanliness. 

Here are some tips to keep your tiles looking their best:

  • Wipe down the tiles after each use to prevent soap scum and water spots from building up.
  • Use a squeegee to remove excess water from the tiles and prevent mould and mildew growth.
  • Regularly clean grout lines with a mixture of baking soda and water to prevent discolouration.

Cleaning bathroom tiles doesn't have to be a daunting task. 

With the right techniques and a little elbow grease, you can revive your tiles and make them look brand new again. 

Remember to gather all the necessary supplies, prepare the cleaning solution, scrub the tiles thoroughly, rinse them well, and dry them properly for the best results. 

By following these steps and maintaining cleanliness, you can enjoy sparkling bathroom tiles for years to come. 

So go ahead, give your tiles some TLC, and enjoy a fresh and clean bathroom once again.

What is the best way to clean bathroom tiles?

The best way how to clean bathroom tiles is by following a few simple steps. These are more likely the same steps mentioned above. 

First, gather your cleaning supplies, including warm water, a cleaning agent like white vinegar or a commercial tile cleaner, baking soda, a scrub brush or sponge, and microfiber cloths or towels. 

Next, prepare a cleaning solution by mixing warm water with your chosen cleaner. 

Scrub the tiles using the solution and a scrub brush or sponge, paying special attention to grout lines and any stubborn stains. 

For tough stains, sprinkle baking soda directly onto the affected areas before scrubbing. 

Rinse the tiles thoroughly with clean water and dry them using microfiber cloths or towels. 

Finally, maintain cleanliness by wiping down the tiles after each use and regularly cleaning grout lines to prevent build-up.

What's the best cleaner for bathroom tiles?

The best cleaner for bathroom tiles depends on personal preference and the type of tiles you have. 

However, some effective options include white vinegar, commercial tile cleaners, and homemade solutions. 

White vinegar is a natural and versatile cleaner that effectively removes dirt, grime, and soap scum from tiles. 

Commercial tile cleaners are specifically formulated to tackle tough stains and may be suitable for various tile types. 

Also, you can create a homemade cleaning solution using ingredients like baking soda, which acts as a natural abrasive to lift stains and brighten tiles. 

The best cleaner for your bathroom tiles is one that effectively removes dirt and grime without damaging the tiles or grout.

How do professionals clean bathroom tiles?

Professionals typically follow a thorough process on how to clean bathroom tiles effectively. 

Here's how they do it:


Professionals begin by assessing the condition of the tiles and identifying any areas that require special attention, such as stubborn stains or grout discolouration.


They gather all the necessary cleaning supplies, including cleaning agents, scrub brushes, sponges, and microfiber cloths.


If there are any tough stains or mildew build-up, professionals may apply pre-treatment solutions or spot treatments to loosen the dirt before cleaning.

Cleaning Solution

They prepare a cleaning solution by mixing water with a suitable cleaner, such as a commercial tile cleaner or a solution containing white vinegar or baking soda.


brushing the tiles

Using scrub brushes or sponges, professionals scrub the tiles thoroughly, paying close attention to grout lines and areas with heavy build-up. 

They may use circular motions to loosen dirt effectively.


Once the tiles are scrubbed, they rinse them thoroughly with clean water to remove any leftover cleaning solution and dirt residue.


After rinsing, professionals dry the tiles and grout lines using microfiber cloths or towels to prevent water spots and maintain their shine.

Finishing Touches

Finally, they inspect the tiles for any remaining stains or spots and touch up as needed. 

They may also apply a sealant to the grout lines to protect against future stains and moisture.

By following these steps and using professional-grade equipment and techniques, professionals can achieve a deep and thorough clean of bathroom tiles, leaving them looking fresh and revitalised.

How do I make my bathroom tiles look new?

To make your bathroom tiles look new, follow these steps:

Clean Thoroughly

Start by thoroughly cleaning the tiles to remove dirt, grime, and soap scum. 

Use a suitable cleaner, such as white vinegar, a commercial tile cleaner, or a homemade solution of baking soda and water. 

Scrub the tiles and grout lines using a scrub brush or sponge, then rinse them thoroughly with clean water.

Remove Stains

For stubborn stains or mildew build-up, apply a spot treatment of baking soda directly onto the affected areas. 

Scrub gently with a brush or sponge to lift the stains before rinsing.

Brighten Grout

Brighten grout lines by scrubbing them with a mixture of baking soda and water. 

This natural abrasive helps to remove dirt and discolouration, leaving the grout looking fresh and bright.

Seal Grout

Consider sealing the grout lines to protect them from future stains and moisture. 

Grout sealant helps to prevent dirt and grime from penetrating the grout, making it easier to clean and maintaining its appearance for longer.

Repair Damage

If your tiles are cracked or damaged, consider repairing or replacing them to restore the overall look of your bathroom. 

Damaged tiles not only detract from the appearance but can also lead to further issues such as water damage.

Enhance Shine

To enhance the shine of your tiles, polish them with a clean, dry microfiber cloth or towel after cleaning and drying. 

This helps to remove any remaining water spots and gives the tiles a glossy finish.

Regular Maintenance

To keep your bathroom tiles looking new, establish a regular cleaning routine. 

Wipe down the tiles after each use to prevent build-up, use a squeegee to remove excess water, and clean grout lines regularly to prevent discolouration.

By following these steps and maintaining a consistent cleaning regimen, you can keep your bathroom tiles looking fresh and new for years to come.

Transform Your Bathroom with Surrey's Premier Cleaning Service

After learning about all these effective cleaning techniques, you might feel overwhelmed by the thought of tackling your bathroom tiles on your own. 

With so much already on your plate, it's understandable if you're hesitant to take on another task. 

However, you also can't continue to ignore the dirt and grime accumulating in your bathroom.

Here’s Patty Plus, Surrey's leading professional commercial and residential cleaning company

We specialise in revitalising your living spaces, from fresh-smelling carpets to eye-catching tiled floors. At Patty Plus, cleaning isn't just a chore; it's our passion.

Patty Plus started in 2014 when Patricia (Patty) decided to invest her time, energy, and resources into creating a cleaning company that goes above and beyond. 

With a love for cleaning deeply ingrained in our DNA, we've earned a reputation for delivering exceptional results.

Over the years, we've expanded our team of cleaning specialists and invested in state-of-the-art equipment and eco-friendly products. 

Whether it's regular cleaning for commercial premises or personalised service for busy families, we're dedicated to exceeding our clients' expectations.

At Patty Plus, we understand that quality comes at a price. 

We don't compete on price; instead, we prioritise professionalism, expertise, and customer satisfaction. 

Our team consists of highly trained professionals who know how to handle various fabrics and finishes with care and precision.

One of our specialities is tile and grout cleaning. 

Using advanced techniques and specialised equipment, we can restore your tiled surfaces to their former glory. 

From inspection and pre-treatment to cleaning, extraction, and sealing, our thorough process ensures outstanding results every time.

By choosing Patty Plus, you're investing in the longevity and cleanliness of your home or business. 

Our services not only eliminate dirt, stains, and odours but also protect your surfaces for years to come. Say goodbye to dirty tiles and hello to a fresh, revitalised space with Patty Plus.

So why wait? 

Let us take the hassle out of cleaning so you can focus on what matters most to you.

Get a FREE quote

Contact Img